Barnwood Bench – Mold set
A precast mold set that will create a 4 foot, rock solid, rustic grained wood effect bench. This is a simple plank bench features a 20″x48″ wood top resting on a base on each end detailed in end grain lumber. This simple kit offers a design that is uniquily rustic in nature and can be colored in a variety of ways to fit the needs of the surroundings including Tru Tint WB, Tru Tique, Integral color or any combination of the three.
Installers can use almost any concrete, though Walttools recommends either Tru Kast high strength flowable mix or Tru Pac C(for creating a high performance casting mix from locally available bag mixes) for best results. Coloration can be completed by use of Walttools Tru Hue Integral color placed into the concrete when the concrete is mixed and poured or it may be stained after demolded and cured.
Tru Tique is a fantastic choice for color effects.
This polyurethane mold set can be used over and over without worry of fatigue and failure.
Full mold set weighs over 100 lbs and requires a large flat(sturdy) surface for proper pouring.
Reinforcement of concrete to industry standards recommended.
There is a sister split stone mold set with the same top and base dimensions which allow the installer to interchange tops and bases with the Barnwood system for mix and match looks.
Set is a top, a single base and a textured skin, (Wood End Grain or Medium Stone). Additional bases available. Both the stone and wood bases are compatible.